This Roses and Angel Heart Monument is produced in our workshop from selected Blue Pearl Granite. The main heart-shaped tablet is cut from a solid stone block, with the lower section developed into a continuous arrangement of hand-carved roses, leaves and floral relief rather than applied decorative pieces. The upper section carries a carved praying angel with extended wings, giving the Angel Heart Monument its distinctive vertical focal point while retaining a usable central inscription field. Every visible floral and figurative element on this model is finished by hand, allowing the carver to control facial contours, wing feather lines, rose petals and relief transitions individually.
The splay area on the base has two functions. First, it can be taken as a drainage detail, helping rainwater move away from the tablet/base junction rather than remaining on a flat horizontal surface. Secondly, customers can also put some words or sandblasting design here. The dowel holes and anchor holes are specifically addressed in the NAMM memorial working practice.
Our factory can modify the heart profile, rose arrangement, angel proportions, wing design, inscription area, base dimensions and overall monument height from customer drawings or reference photographs. FOC CAD shop drawings can be prepared before production, with the final carving released only after design confirmation.
Products info
| Products Name | Roses and Angel Heart Monument |
| Stone Material & Origin | Blue Pearl Granite, Norway |
| Granite Density | ≥ 2.75 g/cm³ |
| Water Absorption Rate | < 0.18% |
| Compressive Strength | >160 MPa |
| Carving Technique | Hand-carved roses, leaves, angel and wing relief |
| Dimensional Tolerance | Normally ±1–2 mm on machined reference dimensions |
| Assembly Method | Dry-fitting inspection before shipment |
| Packaging Standard | Fumigated 20-30mm solid wooden export crates with reinforced support |
| Minimum Order Quantity | 1 crate / approximately 1 ton |
Material
Blue Pearl Granite
Blue Pearl Granite features a dark blue-grey base with scattered silver-blue feldspar crystals that create a naturally varied surface pattern. When polished, these mineral crystals produce a subtle reflective effect across the stone. Its low moisture absorption and durable composition make it suitable for outdoor memorial applications, including headstones, monuments and cemetery markers. The darker background also creates strong visual definition for hand-carved reliefs, sandblasted lettering, inscriptions and portrait etching.
Craftsmanship Inspection & Quality Standards
Block & Crystal Selection
Ultrasonic defect screening on raw slabs
Feldspar orientation for maximum blue gloss
Rejection of surface mineral impurities
Precision Profile Cutting
CAD geometry transfer to wire saws
Preserves stone depth for 3D carvings
Unblemished flat central inscription field
Hand-Carved Rose Relief
Direct 3D carving (zero adhesive joints)
Layered petals with natural leaf veining
Deep undercut shadow lines along edges
Angel & Wing Sculpting
Precise facial and flowing robe detailing
Multi-layered feather texture chiseling
Hidden stainless steel pinning reinforcement
Base Sloping & Drainage
Incline top surface for fast rainwater runoff
Prevents moisture retention & frost spalling
Anchor holes compliant with BS 8415 / NAMM
Final Audit & Crate Packing
100% dry-fit & dimensional tolerance check
Mirror gloss & surface integrity audit
High-density foam in 30mm fumigated crates
FAQ
Everything You Need to Know
Can Blue Pearl Granite be used for an outdoor heart-shaped memorial with hand-carved roses?
Yes. Published Blue Pearl data show low water absorption, high density, strong compressive performance and frost resistance, supporting exterior memorial use. Final suitability should be checked against the selected quarry lot and cemetery environment.
Why is the base of this angel heart monument sloped?
The inclined face provides a drainage fall so rainwater is less likely to remain on the base-to-tablet junction. This reduces water pooling and helps keep lower monument surfaces drier when the memorial is installed on a properly drained foundation.
Can the roses and angel be customized without changing the heart shape?
Yes. Our workshop can revise rose count, relief depth, angel pose, wing treatment, inscription area and proportions from customer sketches or CAD. A drawing is issued for approval before carving so the profile and inscription positions remain controlled.
Can this monument be prepared for BS 8415 or NAMM installation requirements in the UK?
The base can be drilled according to the selected fixing system, including stainless-steel dowel or ground-anchor interfaces. Final hole diameter, depth and location must follow the anchor manufacturer, cemetery rules and current BS 8415 requirements.
Factory production details
Packing and Delivery
Professional Call to Action
Send us your monument dimensions, inscription layout, reference photograph or hand sketch. Our China stone workshop can prepare FOC CAD drawings for approval and issue a factory-direct quotation covering the Blue Pearl stone, hand carving, base configuration, export packing and shipping requirements.
Our address
ROOM 1704-1, NO. 81 ZHANHONG ROAD, SIMING DISTRICT, XIAMEN, 361001, CHINA
Phone Number
+8613859970628
Info@gsdmemorials.com
Hot Tags: roses and angel heart monument, China roses and angel heart monument manufacturers, suppliers, factory, Bible Memorial with Roses, Book Shaped Headstone with Roses, Granite Book Memorial, Heart Headstone Roses, Roses And Heart Headstone, Triple Hearts Black Memorial
